Total articles: 269
| Año | Título | Autores | Título de revista |
|---|---|---|---|
| 2025 | Enhancing Sustainability with LCA: A Comparative Analysis of Design and Manufacturing Processes | Val, Sonia; Lambán, María Pilar | PROCESSES |
| 2025 | Generalising the Machine Tool Integrated Inverse Multilateration Method for the Ambient Thermal Error Analysis of Large Machine Tools in Industrial Environments | Egaña, Fernando; Mutilba, Unai; Yagüe-Fabra, José A.; Chekh, B. Ahmed; Lopez, Susana | Applied Sciences (Switzerland) |
| 2025 | New fast micro-topography estimation algortihms for 5 axis milling | Zekalmi, Yasser; Albajez, José Antonio; Aguado, Sergio; Oliveros, María José | ADVANCES IN ENGINEERING SOFTWARE |
| 2025 | Integrating Lean Six Sigma into Microbiology Laboratories: Insights from a Literature Review | Sancho, David; Rezusta, Antonio; Acero, Raquel | Healthcare (Switzerland) |
| 2025 | Metrological evaluation and classification of porosity in metal additive manufacturing using X-ray computed tomography | Holgado, Ibon; Ortega, Naiara; Yagüe-Fabra, José A.; Plaza, Soraya; Villarraga-Gómez, Herminso | Materials & design |
| 2025 | Methodologies in digital twin for manufacturing industry: A systematic literature review | Aznar Lapuente, Gabriel; Morella Avinzano, Paula; Lamban Castillo, Maria Pilar; Seneviratne, Dammika | Future Generation Computer Systems-The International Journal of Grid Computing Theory Methods and Applications |
| 2025 | Efficient topography simulation for freeform surfaces in 5-axis CNC milling | Zekalmi, Yasser; Albajez, José Antonio; Oliveros, María José; Aguado, Sergio | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
| 2025 | Key performance indicators for optimizing academic performance and course design in online educational platforms | Val, Sonia; Quintas, Alejandro | Cogent Education |
| 2025 | Closed-Loop Control Strategies for a Modular Under-Actuated Smart Surface: From Threshold-Based Logic to Decentralized PID Regulation | Bianchi, Edoardo; Brosed Dueso, Francisco Javier; Yagüe-Fabra, José A. | Applied Sciences (Switzerland) |
| 2025 | Study and Characterization of New KPIs for Measuring Efficiency in Urban Loading and Unloading Zones Using the OEE (Overall Equipment Effectiveness) Model | Gil Gallego, Angel; Lambán, María Pilar; Royo Sánchez, Jesús; Sánchez Catalán, Juan Carlos; Morella Avinzano, Paula | Applied Sciences (Switzerland) |
| 2024 | Characterization and evaluation of stress resistance in the structural bonding of electric cooktops | Gómez, Patricia; Pina, Carmelo; Acero, Raquel; Abadía, José A. | INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES |
| 2024 | A new indicator for measuring efficiency in urban freight transportation: defining and implementing the OEEM (Overall Equipment Effectiveness for Mobility) | Les, Adrián; Morella, Paula; Lambán, María Pilar; Royo, Jesús; Sánchez, Juan Carlos | Applied Sciences (Switzerland) |
| 2024 | Evaluation of a telescopic simultaneous ballbar in a 3-axis machine tool using a reference equipment | Acero, Raquel; Brosed, Francisco Javier; Pueo, Marcos; Aguado, Sergio; Aguilar, Juan José; Velázquez, Jesús | Precision Engineering |
| 2024 | Real-Time Production Scheduling and Industrial Sonar and Their Application in Autonomous Mobile Robots | Burillo, Francisco; Lambán, María-Pilar; Royo, Jesús-Antonio; Morella, Paula; Sánchez, Juan-Carlos | Applied Sciences (Switzerland) |
| 2024 | Analysis of Digital Teacher Education: Key Aspects for Bridging the Digital Divide and Improving the Teaching–Learning Process | Val, Sonia; López-Bueno, Helena | Education Sciences |
| 2024 | A Novel Methodology for Measuring Ambient Thermal Effects on Machine Tools | Egaña, Fernando; Mutilba, Unai; Yagüe-Fabra, José A.; Gomez-Acedo, Eneko | Sensors |
| 2024 | Influence analysis of three different camera calibration methods on a camera-projector measuring system | Tiscareño Felix, Julieta; Albajez Garcia, Jose Antonio; Santolaria Mazo, Jorge | Dyna (Bilbao) |
| 2024 | Development of a six-degree-of-freedom analog 3D tactile probe based on non-contact 2D sensors | Albajez, José Antonio; Velázquez, Jesús; Torralba, Marta; Díaz-Pérez, Lucía C.; Yagüe-Fabra, José Antonio; Aguilar, Juan José | Sensors |
| 2024 | Progress toward the Definition of X-ray Computed Tomography Accuracy in the Characterization of Polymer-Based Lattice Structures | Gallardo, Daniel; Díaz, Lucía-Candela; Albajez, José Antonio; Yagüe-Fabra, José Antonio | Polymers |
| 2024 | Design and development of a not actively driven modular device for parts feeding and sorting | Bianchi, Edoardo; Jorg, Oliver Jonas; Fantoni, Gualtiero; Brosed Dueso, Francisco Javier; Yagüe-Fabra, José A. | MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES |
| 2024 | On the effect of material density in dimensional evaluations by X-ray computed tomography of metal-polymer multi-material parts | Gallardo, Daniel; Díaz, Lucía-Candela; Zanini, Filippo; Albajez, José Antonio; Carmignato, Simone; Yagüe-Fabra, José A. | CIRP Journal of manufacturing science and technology |
| 2024 | In-plane material handling: a systematic review | Bianchi, Edoardo; Brosed Dueso, Francisco Javier; Yagüe-Fabra, José A. | Applied Sciences (Switzerland) |
| 2024 | A novel underactuated smart surface for parts feeding and sorting | Bianchi, Edoardo; Fantoni, Gualtiero; Brosed Dueso, Francisco Javier ; Yagüe-Fabra, José A. | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
| 2024 | Efectos del uso de dispositivos móviles y Geogebra en el aprendizaje de estudiantes universitarios | Orellana Villazón, Elena; Val Blasco, Sonia | Educatio siglo XXI |
| 2024 | Custom post-processor based on the PSO algorithm for 5 axis machine tool compensation | Zekalmi, Yasser; Oliveros, María José; Albajez, José Antonio; Aguado, Sergio | Journal of Manufacturing Processes |
| 2024 | Factores Clave para la Implementación de la Planeación de Ventas y Operaciones en Maquiladoras | Canto Maldonado, Jessica Alejandra; Trasfi Mosqueda, María de la Luz; Elizondo Cortés, Mayra; Lambán, María Pilar | Ciencia Latina Revista Científica Multidisciplinar |
| 2024 | Analysis and prediction of wear in interchangeable milling insert tools using artificial intelligence techniques | Val, Sonia; Lambán, María Pilar; Lucia, Javier; Royo, Jesús | Applied Sciences (Switzerland) |
| 2023 | Multi-Model In-Plant Logistics Using Milkruns for Flexible Assembly Systems under Disturbances: An Industry Study Case | Miqueo, Adrian; Gracia-Cadarso, Marcos; Torralba, Marta; Gil-Vilda, Francisco; Yagüe-Fabra, José Antonio | Machines |
| 2023 | Parallel Walking-Worker Flexible Assembly Lines for High-Mix Low-Volume Demand | Miqueo, Adrian; Yagüe-Fabra, José A.; Torralba, Marta; Oliveros, María-José; Tosello, Guido | PROCESSES |
| 2023 | Uncertainty budget of a large-range nanopositioning platform based on Monte Carlo simulation | Díaz-Pérez, L.C.; Torralba, M.; Muro, L.; Albajez, J.A.; Yagüe-Fabra, J.A. | MEASUREMENT |
| 2023 | Study and Simulation of an Under-Actuated Smart Surface for Material Flow Handling | Bianchi, Edoardo; Jorg, Oliver Jonas; Fantoni, Gualtiero; Brosed Dueso, Francisco Javier Brosed; Yagüe-Fabra, José A. | Applied Sciences (Switzerland) |
| 2023 | Machine learning in manufacturing towards industry 4.0: from ‘For Now’ to ‘Four-Know’ | Chen, Tingting; Sampath, Vignesh; May, Marvin Carl; Shan, Shuo; Jorg, Oliver Jonas; Aguilar Martín, Juan José; Stamer, Florian; Fantoni, Gualtiero; Tosello, Guido; Calaon, Matteo | Applied Sciences (Switzerland) |
| 2023 | Attention guided multi-task learning for surface defect identification | Sampath, V.; Maurtua, I.; Aguilar Martin, J. J.; Rivera, A.; Molina, J.; Gutiérrez, A. | IEEE Transactions on Industrial Informatics |
| 2023 | Intraclass image augmentation for defect detection using generative adversarial neural networks | Sampath, V.; Maurtua, I.; Aguilar Martín, J. J.; Iriondo, A.; Lluvia, I.; Aizpurua, G. | Sensors |
| 2023 | Traceable on-machine tool coordinate measurement through the integration of a virtual metrology frame in large machine tools | Mutilba, Unai; Yagüe-Fabra, José A.; Egaña, Fernando; Kortaberria, Gorka; Uriarte, Luis | CIRP Annals |
| 2023 | Vertical farming monitoring: how does it work and how much does it cost? | Morella, Paula; Lambán, María Pilar; Royo, Jesús; Sánchez, Juan Carlos | Sensors |
| 2023 | Advances in Sustainable and Digitalized Factories: Manufacturing, Measuring Technologies and Systems | Calvo, Roque; Yagüe-Fabra, José A.; Tosello, Guido | Applied Sciences (Switzerland) |
| 2023 | Technologies associated with industry 4.0 in green supply chains: a systematic literature review | Morella, Paula; Lambán, María Pilar; Royo, Jesús; Sánchez, Juan Carlos; Latapia, Jaime | Sustainability (Switzerland) |
| 2023 | X-ray computed tomography performance in metrological evaluation and characterisation of polymeric additive manufactured surfaces. | Gallardo, Daniel; Díaz, Lucía-Candela; Jiménez, Roberto; Torralba, Marta; Albajez, José Antonio; Yagüe Fabra, José Antonio | Additive Manufacturing |
| 2023 | Providing a Common Approach to Designing Dataset-Based Learning Activities Based on a Literature Review | Díaz-Pérez, Lucía; Lopez-Pellicer, Francisco J.; Brufau, Pilar; Lacasta, Javier; Trillo-Lado, Raquel; Yagüe-Fabra, José A.; Zarazaga-Soria, Francisco Javier | Applied Sciences (Switzerland) |
| 2023 | Special Issue “Digital and Sustainable Manufacturing in Industry 4.0” | Calvo, Roque; Yagüe-Fabra, José A.; Tosello, Guido | Applied Sciences (Switzerland) |
| 2023 | Surface characterisation and comparison of polymeric additive manufacturing features for an XCT test object | Gallardo, Daniel; Concha, Mercedes; Díaz, Lucía-Candela; Jiménez, Roberto; Torralba, Marta; Albajez, José Antonio; Yagüe-Fabra, José Antonio | Key engineering materials |
| 2023 | CT-Based Dimensional Metrology for Quality Assessment of the Internal Structure of Additive Manufactured Aluminum Parts | Holgado, Ibon; Ortega, Naiara; Yagüe-Fabra, José Antonio; Villarraga-Gomez, Herminso; Plaza, Soraya | Key engineering materials |
| 2023 | Augmented reality in industrial manufacturing – identification of application areas for AR-based quality control/assembly based on technology suitability | Ho, Phuong Thao; Albajez, José Antonio; Santolaria, Jorge; Yagüe-Fabra, José Antonio | Advances in Science and Technology |
| 2023 | Design of a Test Bench to Measure In-Plane Friction Forces Produced by a New Under-Actuated Modular Device | Bianchi, Edoardo; Jorg, Oliver Jonas; Fantoni, Gualtiero; Brosed Dueso, Francisco Javier; Yagüe-Fabra, José Antonio | Advances in Science and Technology |
| 2023 | La Fábrica de Aviones – Un juego de simulación virtual | Diaz Perez, Lucia Candela; Yagüe Fabra, José Antonio; Aguado Jiménez, Sergio | In-Red |
| 2023 | Integrating Lean and Automation for Enhanced Serology Diagnosis Efficiency in Tertiary Healthcare Microbiology Laboratories | Acero, Raquel; Torralba, Marta; Valverde, Emilio-David; Roc, Lourdes; Rezusta, Antonio | Applied Sciences (Switzerland) |
| 2023 | Thermal error compensation strategy in simultaneous laser multilateration for volumetric verification | Brosed Dueso, Francisco Javier; Aguilar Martín, Juan José; Acero Cacho, Raquel; Santolaria Mazo, Jorge; Aguado Jiménez, Sergio; Pueo Arteta, Marcos | Key engineering materials |
| 2022 | Inaccuracy of machine tools due to verification conditions | Aguado, S.; Pérez, P.; Albajez, J.A.; Velázquez, J.; Santolaria, J. | MEASUREMENT |
| 2022 | Calibration and uncertainty budget analysis of a high precision telescopic instrument for simultaneous laser multilateration | Javier Brosed, F.; José Aguilar, J.; Acero, R.; Santolaria, J.; Aguado, S.; Pueo, M. | MEASUREMENT |
| 2022 | Study of Augmented Reality based manufacturing for further integration of quality control 4.0: a systematic literature review | Ho, Phuong Thao; Albajez, José Antonio; Santolaria, Jorge; Yagüe-Fabra, José A. | Applied Sciences (Switzerland) |
| 2022 | Retrospective Study for the Clinical Evaluation of a Real-Time PCR Assay with Lyophilized and Ready-to-Use Reagents for Streptococcus agalactiae Detection in Prenatal Screening Specimens | Peris, María Paz; Martín-Saco, Gloria; Alonso-Ezcurra, Henar; Escolar-Miñana, Cristina; Rezusta, Antonio; Acero, Raquel; Milagro-Beamonte, Ana | Diagnostics |
| 2022 | Models to evaluate the performance of high-mix low-volume manual or semi-automatic assembly lines | Miqueo, Adrian; Torralba, Marta; Yagüe-Fabra, José A. | Procedia CIRP |
| 2022 | Cost model framework for pieces additively manufactured in fused deposition modeling for low to medium batches | Hernandez Korner, Mario Enrique; Lamban, Maria Pilar; Albajez, Jose Antonio; Santolaria, Jorge; Ng Corrales, Lisbeth del Carmen; Royo, Jesús | 3D printing and additive manufacturing |
| 2021 | A survey on generative adversarial networks for imbalance problems in computer vision tasks | Sampath, V.; Maurtua, I.; Aguilar Martín, J.J.; Gutierrez, A. | Journal of Big Data |
| 2021 | In-process portable photogrammetry using optical targets for large scale industrial metrology | Leizea-Alonso, Ibai; Zubizarreta-Gorostidi, Jon; Mendikute-Garate, Alberto; Yagüe-Fabra, José Antonio | Dyna (Bilbao) |
| 2021 | Scalability of precision design principles for machines and instruments | Yagüe-Fabra, Jose A.; Gao, Wei; Archenti, Andreas; Morse, Edward; Donmez, Alkan | CIRP Annals |
| 2021 | Reference standard for the uncertainty estimation of X–ray Computed Tomography measurements of complex macro-and micro-geometries | Albajez, J.A.; Nuño, S.; Díaz, L.C.; Gallardo, D.; Yagüe, J.A.; Jiménez, R.; Torralba, M. | IOP conference series. Materials science and engineering |
| 2021 | Product development methodology: non-quality caused in production by mistakes in product development, its measurement and improvement integration in the product development process | Gracia Grijota, Carolina; Acero, R.; Yagüe, J.A. | IOP conference series. Materials science and engineering |
| 2021 | Preliminary study of Augmented Reality based manufacturing for further integration of Quality Control 4.0 supported by metrology | Ho, P.T.; Albajez, J.A.; Yagüe, J.A.; Santolaria, J. | IOP conference series. Materials science and engineering |
| 2021 | Evaluation of a soft skills serious game educational methodology in an industrial branches technical training program | Mateo, Jorge; Yagüe, José Antonio | IOP conference series. Materials science and engineering |
| 2021 | Labour productivity in mixed-model manual assembly 4.0 | Miqueo, A.; Martín, M.; Torralba, M.; Yagüe, J.A. | IOP conference series. Materials science and engineering |
| 2021 | From lean production to lean 4.0: a systematic literature review with a historical perspective | Gil-Vilda, F.; Yagüe-Fabra, J. A.; Sunyer, A. | Applied Sciences (Switzerland) |
| 2021 | Product development methodology "scalability" | Gracia Grijota, C.; Acero, R.; Yagüe Fabra, J.A. | Procedia CIRP |
| 2021 | Operator-centred Lean 4.0 framework for flexible assembly lines | Miqueo, A.; Torralba, M.; Yagüe Fabra, J.A. | Procedia CIRP |
| 2021 | Study on lt accuracy improvement by calibration based on network measurements | Velázquez J.; Conte J.; Majarena A.C.; Santolaria J. | Sensors |
| 2021 | Design of a multi-point kinematic coupling for a high precision telescopic simultaneous measurement system | Acero R.; Aguilar J.J.; Brosed F.J.; Santolaria J.; Aguado S.; Pueo M. | Sensors |
| 2021 | Machine tool integrated inverse multilateration uncertainty assessment for the volumetric characterisation and the environmental thermal error study of large machine tools | Egaña F.; Yagüe-Fabra J.A.; Mutilba U.; Vez S. | CIRP Annals |
| 2021 | Influence of high precision telescopic instrument characterization on multilateration points accuracy | Aguado, S.; Brosed, F. J.; Acero, R.; Aguilar, J. J.; Santolaria, J.; Pueo, M. | IOP conference series. Materials science and engineering |
| 2020 | Uncertainty budget analysis for worm and worm gear single-flank rolling tests | Pueo, M.; Acero, R.; Lope, M.A.; Santolaria, J. | MEASUREMENT |
| 2020 | Design methodology for production systems retrofit in SMEs | Pueo, Marcos; Santolaria, Jorge; Acero, Raquel; Sierra-Pérez, Jorge | International Journal of Production Research |
| 2020 | Configuration optimisation of laser tracker location on verification process | Aguado, Sergio; Pérez, Pablo; Albajez, José Antonio; Santolaria, Jorge; Velázquez, Jesús | Materials |
| 2020 | Polymer powder bed fusion surface texture measurement | De Pastre, Marc Antoine; Thompson, Adam; Quinsat, Yann; Albajez García, José A.; Senin, Nicola; Leach, Richard | MEASUREMENT SCIENCE & TECHNOLOGY |
| 2020 | An in-plant milk-run design method for improving surface occupation and optimizing mizusumashi work time | Gil Vilda, F.; Yagüe-Fabra, J.A.; Sunyer Torrents, A. | CIRP Annals |
| 2020 | Measuring sensors calibration in worm gear rolling testers | Pueo, Marcos; Acero, Raquel; Gracia, Ángel; Santolaria, Jorge | Sensors |
| 2020 | Characterization and parameters sensitivity analysis of worm gear rolling measurement | Pueo, M.; Acero, R.; Santolaria, J. | MEASUREMENT |
| 2020 | Development of a high precision telescopic instrument based on simultaneous laser multilateration for machine tool volumetric verification | Aguilar, Juan José; Acero, Raquel; Brosed, Francisco Javier; Santolaria, Jprge | Sensors |
| 2020 | Systematic literature review: Integration of additive manufacturing and industry 4.0 | Korner, M.E.H.; Lambán, M.P.; Albajez, J.A.; Santolaria, J.; Corrales, L.C.N.; Royo, J. | Metals (Basel) |
| 2020 | Lean manual assembly 4.0: A systematic review | Miqueo, A.; Torralba, M.; Yagüe-Fabra, J.A. | Applied Sciences (Switzerland) |
| 2020 | Assessment of gradient-based algorithm for surface determination in multi-material gap measurements by x ray computed tomography | Jiménez Pacheco, R.; Ontiveros, S.; Yagüe Fabra, J. A; Zanini, F.; Carmignato, S.; Albajez, J.A. | Materials |
| 2019 | Influence of laser tracker noise on the uncertainty of machine tool volumetric verification using the Monte Carlo method | Pérez, P.; Aguado, S.; Albajez, J.A.; Santolaria, J. | MEASUREMENT |
| 2019 | Traceability of on-machine tool measurement: Uncertainty budget assessment on shop floor conditions | Mutilba, U.; Sandá, A.; Vega, I.; Gomez-Acedo, E.; Bengoetxea, I.; Yagüe Fabra, J.A. | MEASUREMENT |
| 2019 | Lateral error compensation for stitching-free measurement with focus variation microscopy | Perez, P.; Syam, W.P.; Albajez, J.A.; Santolaria, J.; Leach, R. | MEASUREMENT SCIENCE & TECHNOLOGY |
| 2019 | Uncertainty assessment for on-machine tool measurement: An alternative approach to the ISO 15530-3 technical specification | Mutilba, Urai; Gómez-Acebo, Eneko; Sandá, Alejandro; Vega, Ibon; Yagüe-Fabra, José A. | Precision Engineering |
| 2019 | Measurement uncertainty evaluation model in radial composite gear inspection | Pueo, M.; Acero, R.; Lope, M.A.; Santolaria, J. | Precision Engineering |
| 2019 | Design and development of a calibration artefact for length measurement system | Brosed Dueso, Francisco Javier; Acero Cacho, Raquel; Aguado Jiménez, Sergio; Herrer Torres, Marta; Aguilar Martín, Juan José; Santolaria Mazo, Jorge | Procedia Engineering |
| 2019 | Trajectory definition with high relative accuracy (HRA) by parametric representation of curves in nano-positioning systems | Díaz Pérez, Lucía; Rubio Serrano, Beatriz; Albajez García, José A.; Yagüe Fabra, José A.Y; Mainar Maza, Esmeralda; Torralba Gracia, Marta | Micromachines |
| 2019 | Study on Machine Tool Positioning Uncertainty Due to Volumetric Verification | Aguado, Sergio; Pérez, Pablo; Albajez, A. José; Santolaria, Jorge; Velazquez, Jesús | Sensors |
| 2019 | Development and validation of a calibration gauge for length measurement systems | Brosed, Francisco Javier; Acero Cacho, Raquel; Aguado, Sergio; Herrer, Marta; Aguilar, Juan José; Santolaria Mazo, Jorge | Materials |
| 2019 | 2D positioning control system for the planar motion of a nanopositioning platform | Díaz-Pérez, Lucía; Torralba, Marta; Albajez, José Antonio; Yagüe-Fabra, José Antonio | Applied Sciences (Switzerland) |
| 2019 | Kinematic parameter identification procedure of an articulated arm coordinate measuring machine based on a metrology platform | Brau-Avila, A.; Acero, R.; Santolaria, J.; Valenzuela-Galvan, M.; Icasio-Hernandez, Octavio | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
| 2019 | Analysis of different camera calibration methods on a camera-projector measuring system | Tiscareño, Julieta; Albajez García, José Antonio; Santolaria Mazo, Jorge | Procedia Manufacturing |
| 2019 | Algorithm to optimize measurement system location in a machine tool verification | Aguado, Sergio; Pérez, Pablo; Albajez, José Antonio; Santolaria, Jorge; Velázquez, Jesús | Procedia Manufacturing |
| 2019 | Positioning uncertainty of the control system for the planar motion of a nanopositioning platform | Díaz-Pérez, Lucía; Torralba, Marta; Albajez, José Antonio; Yagüe Fabra, José Antonio | Procedia Manufacturing |
| 2019 | Development of a shape specification based on the waviness parameter of tapered roller bearing | Carrera, D.; Miguel, I.; Padilla, E.; Zaera, V.; Dubón, P.; Santo Domingo, S.; Aguilar, J.J. | Procedia Manufacturing |
| 2019 | Person-based design: A human-centered approach for lean factory design | Gil Vilda, F.; Yagüe Fabra, J.A.; Sunyer Torrents, A. | Procedia Manufacturing |
| 2018 | Self-calibration technique for on-machine spindle-mounted vision systems | Mendikute, A.; Leizea, I.; Yagüe-Fabra, J.A.; Zatarain, M. | MEASUREMENT |
| 2018 | Comparison of surface extraction techniques performance in computed tomography for 3D complex micro-geometry dimensional measurements | Torralba, M.; Jiménez, R.; Yagüe-Fabra, J.A.; Ontiveros, S.; Tosello, G. | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
| 2018 | Integrated multilateration for machine tool automatic verification | Mutilba, U.; Yagüe-Fabra, J.A.; Gomez-Acedo, E.; Kortaberria, G.; Olarra, A. | CIRP Annals |
| 2018 | Matrix architecture plays a pivotal role in 3D osteoblast migration: The effect of interstitial fluid flow | Del Amo, C.; Olivares, V.; Cóndor, M.; Blanco, A.; Santolaria, J.; Asín, J.; Borau, C.; García-Aznar, J.M. | Journal of the Mechanical Behavior of Biomedical Materials |
| 2018 | A geometrical model for managing surface productivity of U-shaped assembly lines | Gil, Vilda, F.; Yagüe-Fabra, J.A.; Sune Torrents, A.; Jauregui-Becker, J.M.; Wits, W.W. | CIRP Annals |
| 2018 | Verification of Machine Tools Using Multilateration and a Geometrical Approach | Acosta, Diana; Albajez García, José Antonio; Yagüe Fabra, José Antonio; Velázquez Sancho, Jesús | Nanomanufacturing and Metrology |
| 2018 | Novel Heterodyne Fringe Projection Technique for Measuring Volumetric Wear in Acetabular UHMWPE Retrievals: A Pilot Study | Medel, F.J.; Povar, M.; Santolaria, J. | ASTM Special Technical Publication |
| 2018 | Analysis of surface extraction methods based on gradient operators for computed tomography in metrology applications | Ontiveros, S.; Jiménez, R.; Yagüe-Fabra, J.A.; Torralba, M. | Materials |
| 2018 | 3D measurement simulation and relative pointing error verification of the telescope mount assembly subsystem for the large synoptic survey telescope | Mutilba, U.; Kortaberria, G.; Egaña, F.; Yagüe-Fabra, J.A. | Sensors |
| 2018 | In-process measurement for the process control of the real-time manufacturing of tapered roller bearings | Brosed, F.J.; Victor Zaera, A.; Padilla, E.; Cebrián, F.; Aguilar, J.J. | Materials |
| 2018 | Relative pointing error verification of the telescope mount assembly subsystem for the large synoptic survey telescope | Mutilba, U.; Kortaberria, G.; Egaña, F.; Yague-Fabra, J.A. | IEEE metrology for aerospace |
| 2018 | One-Dimensional Control System for a Linear Motor of a Two-Dimensional Nanopositioning Stage Using Commercial Control Hardware | Diaz Perez, L.C.; Torralba Gracia, M.; Albajez Garcia, J.A.; Yague Fabra, J.A. | Micromachines |
| 2018 | Vector control strategy for halbach linear motor implemented in a commercial control hardware | Díaz-Pérez, L.C.; Albajez, J.A.; Torralba, M.; Yagüe-Fabra, J.A. | Electronics |
| 2018 | Additive manufacturing with vat polymerization method for precision polymer micro components production | Davoudinejad, Ali ; Díaz-Pérez, Lucía C.; Quagliotti, Danilo; Pedersen, David Bue; Albajez, José A.; Yagüe, José A.; Tosello, Guido | Procedia CIRP |
| 2017 | Glioblastoma on a microfluidic chip: Generating pseudopalisades and enhancing aggressiveness through blood vessel obstruction events | Ayuso, Jose María; Monge, Rosa; Martinez-Gonzalez, Alicia; Virumbrales-Munoz, Maria; Llamazares, Guillermo A.; Berganzo, Javier; Hernandez-Lain, Aurelio; Santolaria, Jorge; Doblare, Manuel; Hubert, Christopher; Rich, Jeremy N.; Sanchez-Gomez, Pilar; Perez-Garcia, Victor M.; Ochoa, Ignacio ; Fernandez, Luis J. | NEURO-ONCOLOGY |
| 2017 | Evaluation of a metrology platform for an articulated arm coordinate measuring machine verification under the ASME B89.4.22-2004 and VDI 2617_9-2009 standards | Acero, R.; Brau, A.; Santolaria, J.; Pueo, M. | JOURNAL OF MANUFACTURING SYSTEMS |
| 2017 | Mathematical calibration procedure of a capacitive sensor-based indexed metrology platform | Brau Ávila, Agustín; Santolaria Mazo, Jorge; Acero Cacho, Raquel; Valenzuela-Galvan, Margarita; Herrera-Jiménez, Victor; Aguilar Martín, Juan José | MEASUREMENT SCIENCE & TECHNOLOGY |
| 2017 | Development of the control strategy of a 2D nanopositioning long-range stage | Torralba, Marta; Albajez, José Antonio; Yagüe Fabra, José Antonio; Aguilar, Juan José | International journal of mechatronics and manufacturing systems |
| 2017 | Experimental approach for the uncertainty assessment of 3D complex geometry dimensional measurements using computed tomography at the mm and sub-mm scales | Jiménez, Roberto; Torralba, Marta; Yagüe Fabra, José Antonio; Ontiveros, Sinué; Tosello, Guido | Sensors |
| 2017 | Traceability of on-machine tool measurement: a review | Mutilba, Unai; Gomez-Acedo, Eneko; Kortaberria, Gorka; Olarra, Aitor; Yagüe-Fabra, Jose A. | Sensors |
| 2017 | Design concerns in dimensional verification and benchmarking proposal | Cajal, C.; Santolaria, J.; Acero, R.; Pueo, M. | International journal of mechatronics and manufacturing systems |
| 2017 | A review of tangential composite and radial composite gear inspection | Pueo, M.; Santolaria, J.; Acero, R.; Gracia, A. | Precision Engineering |
| 2017 | Self-calibrated in-process photogrammetry for large raw part measurement and alignment before machining | Mendikute, Alberto; Yagüe-Fabra, José A.; Zatarain, Mikel; Bertelsen, Álvaro; Leizea, Ibai | Sensors |
| 2017 | Geometrical characterisation of a 2D laser system and calibration of a cross-grid encoder by means of a self-calibration methodology | Torralba, M.; Díaz-Pérez, L.C.; Valenzuela, M.; Albajez, J.A.; Yagüe-Fabra, J.A. | Sensors |
| 2017 | Measurement procedure for application of white light scanner in the automotive sector | Tiscareño, Julieta; Santolaria, Jorge; Albajez García, José Antonio | Procedia Manufacturing |
| 2017 | Monte Carlo method to machine tool uncertainty evaluation | Aguado Jiménez, Sergio; Pérez Muñoz, Pablo; Albajez García, José Antonio; Velázquez Sancho, Jesús; Santolaria Mazo, Jorge | Procedia Manufacturing |
| 2017 | Analysis of the measurement capacity of a machine tool | Pérez Muñoz, Pablo; Aguado Jiménez, Sergio; Albajez García, José Antonio; Velázquez Sancho, Jesús; Santolaria Mazo, Jorge; Aguilar Martín, Juan José | Procedia Manufacturing |
| 2017 | Implementation of the control strategy for a 2D nanopositioning long range stage | Díaz-Pérez, L.C.; Torralba, M.; Albajez, J.A.; Yagüe-Fabra, J.A. | Procedia Manufacturing |
| 2017 | Development of an error compensation case study for 3D printers | Majarena, A.C.; Aguilar, J.J.; Santolaria, J. | Procedia Manufacturing |
| 2017 | Acquisition of practical skills of manufacturing engineering -The case of the chair FERSA-University of Zaragoza | Gimeno, S.; Domingo, S.S.; Chacón, C.; Povar, M.; Aguilar, J.J. | Materials Science Forum |
| 2017 | Integration of a collaborative robot in a U-shaped production line: a real case study | Gil-Vilda, F.; Sune, A.; Yagüe-Fabra, J.A.; Crespo, C.; Serrano, H. | Procedia Manufacturing |
| 2017 | A new calibration guideline for worm and worm-gear rolling testers | Pueo, M.; Santolaria, J.; Acero, R.; Aguado, S.; Gracia, A. | Procedia Manufacturing |
| 2017 | A surface extraction analysis in a multi-material test part for computed tomography in metrology applications | Jiménez-Pacheco, R.; Ontiveros, S.; Yagüe-Fabra, J.A. | Procedia Manufacturing |
| 2016 | Design optimization for the measurement accuracy improvement of a large range nanopositioning stage | Torralba Gracia, Marta; Yagüe Fabra, José Antonio; Albajez García, José Antonio; Aguilar Martín, Juan José | Sensors |
| 2016 | The influence of environmental conditions on the dimensional stability of components injected with PA6 and PA66 | Clavería, I.; Elduque, D.; Santolaria, J.; Pina, C.; Javierre, C.; Fernandez, A. | POLYMER TESTING |
| 2016 | Uncertainty estimation of an indexed metrology platform for the verification of portable coordinate measuring instruments | Acero, R.; Santolaria, J.; Pueo, M.; Abad, J. | MEASUREMENT |
| 2016 | Empirical analysis of the efficient use of geometric error identification in a machine tool by tracking measurement techniques | Aguado, S.; Santolaria, J.; Samper, D.; Velazquez, J.; Aguilar, J. J. | MEASUREMENT SCIENCE & TECHNOLOGY |
| 2016 | Efficient volumetric error compensation technique for additive manufacturing machines | Cajal, C.; Santolaria, J.; Samper, D.; Velazquez, J. | RAPID PROTOTYPING JOURNAL |
| 2016 | Conformal polishing approach: Tool footprint analysis | Dieste, J.A.; Fernández-Cuello, A.; Javierre, C.; Santolaria, J. | Advances in Mechanical Engineering |
| 2016 | Modelling, kinematic parameter identification and sensitivity analysis of a Laser Tracker having the beam source in the rotating head | Conte, J.; Santolaria, J.; Majarena, A.C.; Acero, R. | MEASUREMENT |
| 2016 | Large range nanopositioning stage design: A three-layer and two-stage platform | Torralba, M.; Valenzuela , M.; Yagüe-Fabra, J. A.; Albajez, J. A.; Aguilar, J. J. | MEASUREMENT |
| 2016 | Adequacy of technical and commercial alternatives applied to machine tool verification using laser tracker | Aguado, S.; Santolaria, J.; Samper, D.; Velázquez, J.; Javierre, C.; Fernández, Á. | Applied Sciences (Bucuresti) |
| 2016 | Improving a real milling machine accuracy through an indirect measurement of its geometric errors | Aguado, Sergio; Santolaria, Jorge; Samper, David; Aguilar, Juan J.; Velázquez, Jesús | JOURNAL OF MANUFACTURING SYSTEMS |
| 2016 | Analysis of the initial thermal stabilization and air turbulences effects on Laser Tracker measurements | Pérez Muñoz, Pablo; Albajez García, José Antonio; Santolaria Mazo, Jorge | JOURNAL OF MANUFACTURING SYSTEMS |
| 2016 | Modelling of computered-assisted nachine tool volumetric verificacion process | Aguado Jiménez, Sergio; Velazquez Sancho, Jesús; Samper Carnicer, David; Santolaria Mazo, Jorge | International journal of simulation modelling |
| 2016 | Virtual distances methodology as verification technique for AACMMs with a capacitive sensor based indexed metrology platform | Acero, R.; Santolaria, J.; Brau, A.; Pueo, M. | Sensors |
| 2016 | Forecasting method in multilateration accuracy based on laser tracker measurement | Aguado, Sergio; Santolaria, Jorge; Samper, David; Aguilar, Juan José | MEASUREMENT SCIENCE & TECHNOLOGY |
| 2016 | Development of an n-working stages lot size model considering several productive and logistics issues and its resolution by nonlinear programming | Valencia Méndez, Javier Ernesto; Lambán Castillo, María Pilar; Royo Sánchez,Jesús A., Escamilla, A.I; Can, M. | LATIN AMERICAN APPLIED RESEARCH |
| 2015 | Verification of an articulated arm coordinate measuring machine using a laser tracker as reference equipment and an indexed metrology platform | Acero, R.; Brau, A.; Santolaria, J.; Pueo, M. | MEASUREMENT |
| 2015 | Performance evaluation of laser tracker kinematic models and parameter identification | Conte, J.; Majarena, A. C.; Acero, R.; Santolaria, J.; Aguilar, J. J. | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
| 2015 | A testpart for interdisciplinary analyses in micro production engineering | Möhring, H.C; Kersting, P.; Carmignato, S.; Yagüe-Fabra, J.A.; Maestro, M.; Jiménez, R.; Ferraris, E.; Tunc, L.T.; Bleicher, F.; Wits, W.W.; Walczak, K.; Hedlind, M. | Procedia CIRP |
| 2015 | Verification of a laser tracker with an indexed metrology platform | Acero, R.; Santolaria, J.; Pueo, M.; Brau, A. | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
| 2015 | Calibration strategies of laser trackers based on network measurements | Conte, J.; Majarena, A. C.; Aguado, S.; Acero, R.; Santolaria, J. | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
| 2015 | Simulation of Laser Triangulation Sensors Scanning for Design and Evaluation Purposes | Cajal Hernando, Carlos Enrique; Garrido Rubio, Ana Pilar; Samper Carnicer, David; Santolaria Mazo, Jorge | International journal of simulation modelling |
| 2015 | Application of virtual distances methodology to laser tracker verification with an indexed metrology platform | Acero, R.; Santolaria, J.; Pueo, M.; Aguilar, J. J.; Brau, A. | MEASUREMENT SCIENCE & TECHNOLOGY |
| 2015 | Environmental impact analysis of the injection molding process: Analysis of the processing of high-density polyethylene parts | Elduque, A.; Elduque, D.; Javierre, C.; Fernández, Á.; Santolaria, J. | Journal of Cleaner Production |
| 2015 | The use of a Laser Tracker and a Self-centring Probe for Rotary Axis Verification | Acosta Higuera, Diana; Albajez García, José Antonio; Velázquez Sancho, Jesús. | Procedia Engineering |
| 2015 | Preliminary Modelling and Implementation of the 2D-control for a Nanopositioning Long Range Stage | Torralba Gracia, Marta; Albajez García, José Antonio; Yagüe Fabra, José Antonio; Aguilar Martín, Juan José | Procedia Engineering |
| 2015 | An in vitro model for glioblastoma using microfluidics: Generating pseudopalisades on a chip | Ayuso, José María; Monge, Rosa; Martinez-González, Alicia; Llamazares, Guillermo A.; Berganzo, Javier; Hernández-Laín, Aurelio; Santolaria, Jorge; Doblaré, Manuel; Sánchez-Gómez, Pilar; Pérez-García, Victor M.; Ochoa, Ignacio; Fernandez, Luis J. | CANCER RESEARCH |
| 2015 | Surface Roughness Evolution Model for Finishing Using an Abrasive Tool on a Robot | Fernández, Ángel; Dieste, José Antonio; Javierre, Carlos; Santolaria Mazo, Jorge | INTERNATIONAL JOURNAL OF ADVANCED ROBOTIC SYSTEMS |
| 2015 | Methodology for Clamping Load Measurement of Locking Systems Based On White Light Digitalization | Javierre, Carlos; Clavería, Isabel; Santolaria Mazo, Jorge; Elduque, Daniel | MEASUREMENT |
| 2015 | Laser tracker kinematic error model formulation and subsequent verification under real working conditions | Conte Blasco, Javier; Santolaria Mazo, Jorge; Majarena Bello, Ana Cristina; Aguado Jiménez, Sergio | Procedia Engineering |
| 2015 | Geometrical verification based on a laser triangulation system in industrial environment. Effect of the image noise in the measurement results | Brosed Dueso, Francisco Javier; Aguilar Martín, Juan José; Santolaria Mazo, Jorge; Lázaro Carrascal, Raúl | Procedia Engineering |
| 2015 | Improving the Accuracy of a Machine Tool with Three Linear Axes using a Laser Tracker as Measurement System | Aguado, S.; Santolaria, J.; Aguilar, J.; Samper, D.; Velazquez, J. | Procedia Engineering |
| 2014 | La medición de la eficiencia de la función mantenimiento a través de los KPIs financieros. | Galar Pascual,D.; Berges Muro, L.; Lambán Castillo, Mª. P.; Tormos, B. | Dyna (Bilbao) |
| 2014 | Design and mechanical evaluation of a capacitive sensor-based indexed platform for verification of Portable Coordinate Measuring Instruments | Brau Avila, Agustín.; Santolaria Mazo, Jorge.; Aguilar Martín, Juan José | Sensors |
| 2014 | Rotation error modeling and identification for Robot kinematic calibration by circle point method | Santolaria, Jorge; Conte, Javier; Pueo, Marcos; Javierre, Carlos | METROLOGY AND MEASUREMENT SYSTEMS |
| 2014 | Articulated arm coordinate measuring machine calibration by laser tracker multilateration | Santolaria, J.; Majarena, A. C.; Samper, D.; Brau, A.; Velázquez, J. | The Scientific World Journal |
| 2014 | Procedure for geometrical errors identification in Machine Tool | Acosta Higuera, Diana; Velázquez Sancho, Jesús; Albajez García, José Antonio; Yagüe Fabra, José Antonio | International journal of mechatronics and manufacturing systems |
| 2014 | General procedure to evaluate the progress and results of the student: teaching and learning the skills of Manufacturing Engineering | Lope Domingo, Miguel Angel; Albajez García, José Antonio; Santolaria Mazo, Jorge | Key engineering materials |
| 2014 | Homing sensor system design for a 2D long range nanopositioning moving platform. | Acero Cacho, Raquel; Albajez García, José Antonio; Yagüe Fabra, José Antonio; Torralba Gracia, Marta; Valenzuela Galván, Margarita; Aguilar Martín, Juan José | Key engineering materials |
| 2014 | Comparison of double flank roll testers for worm and worm gear | Pueo Arteta, M.; Santolaria Mazo, J.; Acero Cacho, R.; Faci, A. T. | Key engineering materials |
| 2014 | Evaluation of different probing systems used in articulated arm coordinate measuring machines | Brau, A.; Valenzuela, M.; Santolaria, J.; Aguilar, J. J. | METROLOGY AND MEASUREMENT SYSTEMS |
| 2014 | Double flank roll testing as verification technique for micro gears | Cacho, R. A.; Santolaria Mazo, J.; Arteta, M. P. | Key engineering materials |
| 2014 | Parametric modeling and compensation of layer manufacturing machines | Cajal, C.; Santolaria, J.; Velazquez, J. | Materials Science Forum |
| 2014 | Laser Tracker error modeling and kinematic calibration strategy | Conte, J.; Santolaria, J.; Majarena, A. C.; Brau, A.; Aguilar, J. J. | Key engineering materials |
| 2014 | La medición de la eficiencia de la función mantenimiento a través de KPIS financieros | Galar, D.; Berges, L.; Lambán, M.P.; Tormos, B. | Dyna (Colombia) |
| 2014 | Costs modelling applied to activities of integrated management | González Pedraza, Rosario; Lambán Castillo, María Pilar | Key engineering materials |
| 2014 | A comparative of 3D surface extraction methods for potential metrology applications | Ontiveros-Zepeda, S.; Yagüe-Fabra, J. A; Jiménez-Pacheco, R.; Brosed-Dueso, F. | Key engineering materials |
| 2014 | Modelo analítico para determinar lotes óptimos de producción considerando diversos factores productivos y logísticos | Valencia, J.; Lambán, M.P.; Royo, J. | Dyna (Colombia) |
| 2014 | Teaching mechanism calibration to engineering students | Majarena, A. C.; Santolaria, J.; Samper, D.; Aguilar, J. J. | Key engineering materials |
| 2014 | Desarrollo de un modelo para determinar el lote óptimo de producción mediante programación no lineal y propuesta de su resolución con una hoja de cálculo | Valencia, J.; Lambán, M. P.; Royo, J. | Revista Facultad de Ingenieria-Universidad de Antioquia |
| 2014 | Programación de una célula robotizada para soldadura de complementos a depósitos de acero a presión | Majarena-Bello,A.; Brosed-Dueso,F.; Suelves-Albert,A.; Santolaria-Mazo,J. | Dyna (Bilbao) |
| 2014 | Mechanical design of an indexed metrology platform for verification of portable coordinate measuring machines | Brau Avila,A.; Santolaria Mazo,J.; Valenzuela Galván,M.; Aguilar Martín,J. J. | International journal of mechatronics and manufacturing systems |
| 2014 | Protocol for machine tool volumetric verification using commercial laser tracker | Aguado,S.; Santolaria,J.; Samper,D.; Aguilar,J. J. | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
| 2014 | A software development to establishing optimal production lots and its application in academic and business environments | Valencia, Javier; Royo Sánchez, Jesús Antonio; Lambán, Ma. Pilar; Canto, Jessica; Díaz, Jorge | Ingeniería e Investigación |
| 2014 | A stratey for geometric error characterization in multi-axis machine tool by use of a laser tracker | Aguado Jiménez, Sergio;Samper Carnicer, David;Santolaria Mazo, Jorge; Aguilar Martin, Juan José | Key engineering materials |
| 2014 | Development of a New Calibration Procedure and Its Experimental Validation Applied to a Human Motion Capture System | Royo, Ana C; Aguilar, Juan José; Santolaria Mazo, Jorge | JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME |
| 2014 | Volumetric Verification of Multiaxis Machine Tool Using Laser Tracker | Aguado, Sergio; Samper, David; Santolaria Mazo, Jorge; Aguilar, Juan José | The Scientific World Journal |
| 2014 | Environmentally Conscious Polishing System Based on Robotics and Artificial Vision | Dieste, José Antonio; Fernández, Angel; Javierre, Carlos; Santolaria Mazo, Jorge | Advances in Mechanical Engineering |
| 2013 | Analysis of Tsai calibration method using two- and three-dimensional calibration objects | Samper,D.;Santolaria,J.;Brosed,F. J.;Majarena,A. C.;Aguilar,J. J. | MACHINE VISION AND APPLICATIONS |
| 2013 | Uncertainty estimation in robot kinematic calibration | Santolaria,J.;Gines,M. | ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING |
| 2013 | Fundamental correction strategies for accuracy improvement of dimensional measurements obtained from a conventional micro-CT cone beam machine | Jiménez, R.; Ontiveros, S.; Carmignato, S.; Yagüe-Fabra, J. A. | CIRP Journal of manufacturing science and technology |
| 2013 | Self-alignment of on-board measurement sensors for robot kinematic calibration | Santolaria, J.; Brosed, F. J; Velázquez, J. ;Jiménez, R. | Precision Engineering |
| 2013 | Machine tool Verification According to Machine Configuration | Acosta, D.; Velázquez, J.; Albajez, J.A; Yagüe, J.A.; Lope, M.A. | Procedia Engineering |
| 2013 | Analysis and Design of a Homing Sensor System for a 2D Moving Platform with Nanometer Resolution | Acero, R.; Albajez, J.A.; Yagüe-Fabra, J.A.; Torralba, M.; Valenzuela, M.; Aguilar, J.J. | Procedia Engineering |
| 2013 | Volumetric error compensation technique for 3D printers | Cajal, C.; Santolaria, J.; Velazquez, J.; Aguado, S.; Albajez, J.A. | Procedia Engineering |
| 2013 | The Accreditation of Industrial Engineering in Spain: Teaching and Learning the Skills of Manufacturing Engineering | Lope Domingo, M.A. ; Albajez, J.A.; Santolaria, J. | Procedia Engineering |
| 2013 | Design, manufacture and geometric verification of rapid prototyped microfluidic encapsulations by computed tomography | Santolaria, Jorge; Monge, Rosa; Tobajas, Ángel; Jimenez, Roberto; Cabrera, Mirko A.; Fernandez, Luis J. | COMPUTERS IN INDUSTRY |
| 2013 | Influence of measurement noise and laser arrangement on measurement uncertainty of laser tracker multilateration in machine tool volumetric verification | Aguado, S.; Santolaria, J.; Samper, D.; Aguilar, J. J. | Precision Engineering |
| 2013 | Laser tracker-based kinematic parameter calibration of industrial robots by improved CPA method and active retroreflector | Santolaria, Jorge; Conte, Javier; Ginés, Manuel | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
| 2013 | Machine tools for large parts | Uriarte, L.;Zatarain, M.;Axinte, D.;Yagüe-Fabra, J.;Ihlenfeldt, S.;Eguia, J.;Olarra, A. | CIRP Annals |
| 2013 | A 3D edge detection technique for surface extraction in computed tomography for dimensional metrology applications | Yagüe-Fabra, J. A.; Ontiveros, S.; Jiménez, R.; Chitchian, S.; Tosello, G.; Carmignato, S. | CIRP Annals |
| 2013 | Cálculo de la vida útil remanente mediante trayectorias móviles entre hiperplanos de máquinas de soporte vectorial | Galar Pascual, Diego; Berges Muro, Luis; Lambán Castillo, Ma. Pilar; Huertas Talón, José Luis; Tormos Martínez, Bernardo | Interciencia |
| 2013 | Modelo para el cálculo del costo de almacenamiento de un producto: caso de estudio en un entorno logístico | Lambán, Mª Pilar; Royo, Jesús; Valencia, Javier; Berges, Luis; Galar, Diego | Dyna (Colombia) |
| 2013 | Análisis y mejoras en el diseño de un mecanismo cinemático de alta precisión | Majarena-Bello, A.; Santolaria-Mazo, J.; Samper-Carnicer, D.; Aguilar-Martín, J. J. | Dyna (Bilbao) |
| 2013 | Correction of the refraction phenomenon in photogrammetric measurement systems | Samper, D.; Santolaria, J.; Majarena, A. C.; Aguilar, J. J. | METROLOGY AND MEASUREMENT SYSTEMS |
| 2013 | Micro sensors with polymer membrane for accurate 3D force and displacement measurements | Ferreira, N.; Krah, T.; Dietzel, A.; Buttgenbach, S.; Sierra Granada, A.; Albajez, J.A. | Proceedings of IEEE Sensors … |
| 2013 | Error compensation method for improving the accuracy of biomodels obtained from CBCT data | Santolaria Mazo, Jorge; Jimenez Pacheco, Roberto; Rada, M.; Loscos, F. | MEDICAL ENGINEERING & PHYSICS |
| 2013 | Machine Tool Rotary Axis Compensation Trough Volumetric Verification Using Laser Tracker | Aguado, Sergio; Samper, David; Santolaria Mazo, Jorge; Aguilar, Juan José | Procedia Engineering |
| 2013 | Verification methods for micro gears. Analysis of double flank roll testing applied to micro gears | Acero, Raquel; Santolaria Mazo, Jorge; Pueo, Marcos | Procedia Engineering |
| 2013 | Education Software For The Modelling And Calibration Of Kinematic Mechanisms | Majarena, Ana Cristina; Santolaria Mazo, Jorge; Samper, David; Aguilar, Juan José | Procedia Engineering |
| 2013 | Double Flank Roll Testing Machines Intercomparison for Worm and Worm Gear | Pueo Arteta, M.; Santolaria Mazo, Jorge; Acero Cacho, R.; Aso Arjol, G. | Procedia Engineering |
| 2013 | Identification and Kinematic Calculation of Laser Tracker Errors | Conte, Javier; Santolaria Mazo, Jorge; Majarena, Ana Cristina; Aguilar, Juan José | Procedia Engineering |
| 2012 | Identification strategy of error parameter in volumetric error compensation of machine tool based on laser tracker measurements | Aguado,S.; Samper,D.; Santolaria, J.; Aguilar,J. J. | INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE |
| 2012 | Laser tracker based volumetric verification of machine tools | Aguado,S.;Samper,D.;Santolaria,J.;Aguilar,J. J. | Advanced materials research |
| 2012 | Surface wear of TiN coated nickel tool during the injection moulding of polymer micro Fresnel lenses. | Tosello, G ; Hansen, H. N. ; Gasparin, S. ; Albajez, J. A. ; Esmoris, J. I. | CIRP Annals |
| 2012 | Towards an effective identification strategy in volumetric error compensation of machine tools | Aguado,S.;Samper,D.;Santolaria,J.;Aguilar,J. J. | MEASUREMENT SCIENCE & TECHNOLOGY |
| 2012 | Laser triangulation sensor and six axes anthropomorphic robot manipulator modelling for the measurement of complex geometry products | Brosed,F. J.;Santolaria,J.;Aguilar,J. J.;Guillomía,D. | ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING |
| 2012 | Study of rotary angle flexible hinges in parallel mechanisms | Majarena-Bello,A.; Santolaria-Mazo,J.; Samper-Carnicer,D.; Aguilar-Martín,J. J. | Dyna (Bilbao) |
| 2012 | Kinematic calibration of a 2-DOF spatial parallel mechanism | Majarena, A. C.;Santolaria, J.;Samper, D.;Aguilar, J. J. | AIP Conference Proceedings |
| 2012 | Measurement of micro-molded parts by computed tomography | Ontiveros, S.;Yagüe, J. A.;Jiménez, R.;Aguilar, J. J. | AIP Conference Proceedings |
| 2012 | Dimensional measurement of micro-moulded parts by computed tomography | Ontiveros, S.;Yagüe-Fabra, J. A.;Jiménez, R.;Tosello, G.;Gasparin, S.;Pierobon, A.;Carmignato, S.;Hansen, H. N. | MEASUREMENT SCIENCE & TECHNOLOGY |
| 2012 | Uncertainty evaluation in robot calibration by Monte Carlo method | Santolaria, J.;Ginés, M.;Vila, L.;Brau, A.;Aguilar, J. J. | AIP Conference Proceedings |
| 2012 | MODELADO E IDENTIFICACIÓN DE PARÁMETROS GEOMÉTRICOS DE LÁSER TRACKERS | Majarena Bello, A.C.; Santolaria Mazo, J.; Samper Carnicer, D.; Aguilar Martín, J.J. | Anales de ingeniería mecánica |
| 2011 | Application of dynamic benchmarking of rotating machinery for eMaintenance | Galar, Diego; Lamban, Pilar; Berges, Luis | International Journal of System Assurance Engineering and Management |
| 2011 | Development of a parametric model and virtual machine to estimate task specific measurement uncertainty for a five-axis multi-sensor coordinate measuring machine | Ramu, P.;Yagüe, J. A.;Hocken, R. J. ;Miller, J. | Precision Engineering |
| 2011 | A crenellated-target-based calibration method for laser triangulation sensors integration in articulated measurement arms | Santolaria, J.;Aguilar, J. -.;Guillomía, D. ;Cajal, C. | ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING |
| 2011 | Calibration, non-geometric error modelling and correction methods for articulated Arm Coordinate Measuring Machines | Aguilar, J. J.;Santolaria, J.;Yagüe, J. A. ;Majarena, A. C. | International journal of mechatronics and manufacturing systems |
| 2011 | 3D geometrical inspection of complex geometry parts using a novel laser triangulation sensor and a robot | Brosed, F. J.;Aguilar, J. J.;Guillomía, D. ;Santolaria, J. | Sensors |
| 2011 | Spatial resolution-based kinematic design of a parallel positioning platform | Majarena, A. C.; Santolaria, J.; Samper, D. ; Aguilar Martin, J. J. | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
| 2011 | A thermally-stable setup and calibration technique for 2D sensors | Yagüe-Fabra, J. A.;Valenzuela, M.;Albajez, J. A. ;Aguilar, J. J. | CIRP Annals |
| 2011 | Modelling and calibration of parallel mechanisms using linear optical sensors and a coordinate measuring machine | Majarena,A. C.; Santolaria,J.; Samper,D.; Aguilar,J. J. | MEASUREMENT SCIENCE & TECHNOLOGY |
| 2011 | Backlash, positioning repeatability and preload analysis of a parallel mechanism | Majarena-Bello,A.;Santolaria-Mazo,J.;Samper-Carnicer,D.;Aguilar-Martín,J. J. | Dyna (Bilbao) |
| 2010 | Detección de patologías comunes en parques de maquinaria rotatica: OFAS Overall Factory Average Spectrum | Galar-Pascual, D.; Berges-Muro, L.; Royo-Sánchez, J | Mantenimiento (Barcelona) |
| 2010 | La problemática de la medición del rendimiento en la función mantenimiento. | Galar-Pascual, D.; Berges Muro, L.; Royo-Sánchez, J. | Dyna (Bilbao) |
| 2010 | An Overview of Kinematic and Calibration Models Using Internal/External Sensors or Constraints to Improve the Behavior of Spatial Parallel Mechanisms | Majarena, Ana C.;Santolaria, Jorge;Samper, David ;Aguilar, Juan J. | Sensors |
| 2010 | Comprehensive simulation software for teaching camera calibration by a constructivist methodology | Samper, D.; Santolaria, J.; Majarena, A. C. ; Aguilar, J. J. | MEASUREMENT |
| 2010 | Teaching camera calibration by a constructivist methodology | Samper, D.; Santolaria, J.; Pastor, J. J.; Aguilar, J. J. | IEEE TRANSACTIONS ON EDUCATION |
| 2010 | A self-centering active probing technique for kinematic parameter identification and verification of articulated arm coordinate measuring machines | Santolaria, J.;Brau, A.;Velazquez, J. ;Aguilar, J. J. | MEASUREMENT SCIENCE & TECHNOLOGY |
| 2010 | IDENTIFICACION DE PARAMETROS CINEMATICOS DE UNA PLATAFORMA PARALELA PAN-TILT BASADA EN CINEMATICA INVERSA Y DIRECTA CINEMATICA PARALELA | Majarena, A.C.; Santolaria, J.; Samper, D.; Aguilar, J.J. | Anales de ingeniería mecánica |
| 2010 | COMPARACION DE ESTANDARES INTERNACIONALES DE VERIFICACION DE BRAZOS ARTICULADOS DE MEDICION POR COORDENADAS: ASME B89.4.22-2004 VS VDI 2617_9-2009 | Santolaria, J.; Majarena, A.C.; Samper, D.; García, J.J.; Aguilar, J.J. | Anales de ingeniería mecánica |
| 2009 | A new out-of-machine calibration technique for passive contact analog probes | Yague, J.A; Albajez, J.A; Velázquez, J.; Aguilar, J.J; | MEASUREMENT |
| 2009 | Development and calibration of self-centring probes for assessing geometrical errors of machines | Yagüe, J. A.; Velázquez, J; Albajez, J. A.; Aguilar, J.J.; Lope, M.A.; Santolaria, J. | MEASUREMENT SCIENCE & TECHNOLOGY |
| 2009 | Modelling and Calibration Technique of Laser Triangulation Sensors for Integration in Robot Arms and Articulated Arm Coordinate Measuring Machines | Santolaria, J.; Guillomía, D.; Cajal, C.; Albajez, J. A.; Aguilar, J.J. | Sensors |
| 2009 | Calibration-Based Thermal Error Model for Articulated Arm Coordinate Measuring Machines | SANTOLARIA, J.;YAGUE,J.;JIMENEZ,R.;AGUILAR,J. | Precision Engineering |
| 2009 | A New Out-of-Machine Calibration Technique for Passive Contact Analog Probes | YAGUE, J.;ALBAJEZ,J.;VELAZQUEZ,J.;AGUILAR,J. | MEASUREMENT |
| 2009 | A One-Step Intrinsic and Extrinsic Calibration Method for Laser Line Scanner Operation in Coordinate Measuring Machines | SANTOLARIA, J.;PASTOR,J. J.;BROSED,F. J.;AGUILAR,J. J. | MEASUREMENT SCIENCE & TECHNOLOGY |
| 2009 | Development of a 1Ddisplacement lowcost sensor prototype based on the inverse square law | Velazquez, J.; Albajez, J. A.; Yagüe, J.A.; Aguilar, J.J. | AIP Conference Proceedings |
| 2009 | PANT-TILT PLATFORM DESIGN BASED ON PARALLEL KINEMATICS | Majarena, A.C.; Santolaria, J; Aguilar, J.J.; Pastor, J.; Cajal, C. | AIP Conference Proceedings |
| 2009 | Educational innovation proyect using metrovisionlab | Pastor Perez, Jorge Juan; Santolaria, J.; Samper, D.; Aguilar, J.J. | IADAT journal of advanced technology on education |
| 2008 | Characterisation of 1D opto-electronic sensors and their application to angular self-centring probes for machine-tool verification | Yague, J.A; Aguilar, J.J; Albajez, J.A; Santolaria, J. | MEASUREMENT |
| 2008 | Kinematic Parameter Estimation Technique for Calibration and Repeatability Improvement of Articulated Arm Coordinate Measuring Machines | SANTOLARIA, J.;AGUILAR,J.;YAGUE,J.;PASTOR,J. | Precision Engineering |
| 2008 | Desarrollo De Un Sistema De Visión De Doble Sonda De Triangulación Láser Por Barrido Para Inspección De Intercambiadores EGR | BROSED, F. J.;GUILLOMÍA,D.;SANTOLARIA,J.;ALBAJEZ,J. A.;AGUILAR,J. J. | Anales de ingeniería mecánica |
| 2008 | Desarrollo De Un Modelo De Error Para El Diseño y Caracterización De Un Sistema De Medición De Altas Prestaciones Basado En Estereometría | MAJARENA, A. C.;PASTOR,J. J.;JIMÉNEZ,R.;YAGÜE,J. A.;AGUILAR,J. J. | Anales de ingeniería mecánica |
| 2008 | Técnica De Identificación De Parámetros Cinemáticos Para Brazos Articulados De Medición Por Coordenadas a Partir De Información Multi-Postura Usando Un Palpador De Asiento Cinemático | SANTOLARIA, J.;AGUILAR,J. J.;PASTOR,J. J.;JIMÉNEZ,R.;CAJAL,C. | Anales de ingeniería mecánica |
| 2008 | Desarrollo De Palpadores Autocentrantes De Bajo Coste Para Máquinas Herramienta | VELÁZQUEZ, J.;ALBAJEZ,J. A.;YAGÜE,J. A.;LOPE,M. A.;AGUILAR,J. J. | Anales de ingeniería mecánica |
| 2007 | Aplicación de un nuevo concepto de palpador analógico de alto rango en máquina-herramienta | Albajez, J.A.; Aguilar, J.J.; Yagüe, J.A.; Velázquez, J. | IMHE. Información de máquinas-herramienta, equipos y accesorios |
| 2007 | Aplicación De Un Nuevo Concepto De Palpador Analógico De Alto Rango En Máquina Herramienta | ALBAJEZ, J. A.;AGUILAR,J. J.;YAGÜE,J. A.;VELÁZQUEZ,J. | IMHE. Información de máquinas-herramienta, equipos y accesorios |
| 2006 | Analysis, characterization and accuracy improvement of optical coordinate measurement systems for car body assembly quality control | Aguilar,J. J.;Sanz,M.;Guillomia,D.;Lope,M.;Bueno,I. | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
| 2006 | Detección de colisiones en 3D para planificación automática de procesos de plegado de chapa | Jiménez,R.;Villagrasa,R.;Pastor,J. J.;Aguilar,J. J. | IMHE. Información de máquinas-herramienta, equipos y accesorios |
| 2006 | Optimisation of sheet metal bending sequences using genetic algorithms | Jimenez,R.;Villagrasa,R.;Albajez,J. A.;Aguilar,J. J. | Materials Science Forum |
| 2006 | Self-centering probes with parallel kinematics to verify machine-tools | Trapet,E.;Martin,J. J. A.;Yague,J. A.;Spaan,H.;Zeleny,V. | Precision Engineering |
| 2005 | Development of a Stereo Vision System for Non-Contact Railway Concrete Sleepers Measurement Based in Holographic Optical Elements | Aguilar, J. J.;Lope, M.;Torres, F.;Blesa, A. | MEASUREMENT |
| 2005 | Optimización de secuencias de plegado de chapa mediante algoritmos genéticos. | Jimnez Pacheco, Roberto;Pastor Prez, Jorge Juan;Aguilar Martn, Juan Jos;Villagrasa Samper, Rubn;Buetas Alriols, Jos Manuel | IMHE. Información de máquinas-herramienta, equipos y accesorios |
| 2005 | Sistema de Gestión de la Planificación de Recursos Integrando Producción -Mantenimiento: OrthoGES. | Royo, J.; Berges, L.; Lope, M.A.; Aguilar, J.J.; González, R. | Mantenimiento (Barcelona) |
| 2004 | Accuracy analysis of laser scanning probes used in coordinate measurement: Simulation and experiments | Aguilar, J.J.;Santolaria, J.;Guillomia, D.;Pastor, J.;Cajal, C. | VDI-Berichte |
| 2004 | A new calibration procedure for coordinate measuring machine analog probes and machine-tool self-centring probes: Probes calibration system based on balls artefacts | Yagüe, Jose Antonio;Aguilar, J.J.;Trapet, E.;Albajez, J.A.;Lope, M.A. | VDI-Berichte |
| 2004 | Diseño, modelado, fabricación y ensayo de palpadores autocentrantes para verificación de máquina-herramienta. | Yagüe, J.A.;Aguilar, J. J.;Guillomía, D.;Trapet, E. | IMHE. Información de máquinas-herramienta, equipos y accesorios |
| 2004 | Análisis y calibración de palpadores analógicos para maquinas de medir por coordenadas y maquinas-herramienta | Yagüe, J.A.; Albajez, J.A.; Aguilar, J.J.; Lope, M.A.; Cajal, C. | Anales de ingeniería mecánica |
| 2003 | Formación en el ámbito universitario sobre producción industrial en España. | Bernard Fernández, J.; Royo Sánchez, J.A. | Ingeniería y gestión de mantenimiento |
| 2003 | Análisis del proceso de curvado de tubos. Descripción de los métodos más comunes y su implementación en máquinas de control numérico. | Villagrasa Samper, Rubén;Buetas Alriols, Manuel;Pastor Pérez, Jorge Juan;Yag?E Fabra, José Antonio;Aguilar Martín, Juan José | Deformación metálica |
| 2003 | Obtención de secuencias de plegado de chapa. Técnicas avanzadas de cálculo automático. | Villagrasa Samper, Rubén;Buetas Alriols, José Manuel;Jiménez Pacheco, Roberto;Lope Domingo, Miguel Angel;Aguilar Martín, Juan José | Deformación metálica |